E1 poplar DIY grade medium density fiberboard

Medium Density Fiberboard is a kind of artificial board made by separating fibers, drying, gluing, and hot pressing with wood fibers or other plant fibers as raw materials. It has the following advantages:

- Light material: The material of medium density fiberboard is relatively light, so it is more convenient during transportation and installation.

- High strength: The strength of medium density fiberboard is relatively high, so it can withstand higher pressure and impact forces.

- Uniform structure: The structure of medium density fiberboard is relatively uniform, so it is less likely to deform and crack.

- Good workability: The workability of medium density fiberboard is good, and it can be processed by cutting, drilling, grooving, etc.

- Strong decorative: The surface of medium density fiberboard can be decorated in various ways, such as veneering, coating, etc., and has good decorative properties.

The application scenarios of medium density fiberboard include:

- Furniture making: Medium density fiberboard can be used to make furniture, such as wardrobes, bookcases, TV cabinets, etc.

- Interior decoration: Medium density fiberboard can be used to make interior decoration materials, such as ceilings, wall panels, floors, etc.

- Office supplies: Medium density fiberboard can be used to make office supplies, such as file cabinets, desks, etc.

- Packaging materials: Medium density fiberboard can be used to make packaging materials, such as cartons, packaging boxes, etc.

The environmental protection standards of medium density fiberboard mainly include the following aspects:

1. Formaldehyde emission: The formaldehyde emission of medium density fiberboard should meet the requirements of the national standard GB 18580-2017 "Limit of Formaldehyde Emission of Indoor Decorative Materials, Wood-based Panels and Their Products". Among them, the formaldehyde emission of E1 grade panels should be less than or equal to 0.124mg/m³, and the formaldehyde emission of E2 grade panels should be less than or equal to 0.3mg/m³.

2. Other harmful substances: Medium density fiberboard may also contain other harmful substances, such as benzene, toluene, xylene, TVOC, etc. The content of these substances should also meet the requirements of national standards.

3. Environmental protection requirements during processing: During the processing of medium density fiberboard, certain environmental protection requirements should also be followed, such as the use of environmentally friendly adhesives, and the reduction of dust pollution.

The thickness of Medium density fiberboard is generally between 3mm-25mm, with common thicknesses of 3mm, 5mm, 9mm, 12mm, 15mm, 18mm, and 25mm.

The length and width dimensions of Medium density fiberboard are generally 1220mm×2440mm, but there are also other dimensions, such as 1220mm×1830mm, 915mm×1830mm, and 915mm×2135mm.

Our company produces a variety of commercial plywood, including acoustic Panels with high sound insulation, weather resistance and durability, melamine plywood with high hardness and environmental friendliness. WPC boards are waterproof and wear-resistant, and Film Faced Plywood are easy to construct and widely used. We can customize colors and sizes to provide you with comprehensive panel services.